UP118 spray adhesive series
1. The smell is small, the stability is good, and the spraying is smooth.
2, strong adhesion. The viscosity maintenance time is moderate, the heat resistance is good, and the cold resistance is excellent.
Corresponding parameter set not found, please add it in property template of background
1. General-purpose spray glue;
2. It has good adhesion effect on sponge and cloth, textile skin, thin skin, cardboard, MDF, wood board, PVC, PU leather, EVA foaming;
1, spray glue
Spray evenly when spraying, that is, it should not be too thin, and it should not be glued to avoid poor glue or dryness.
The spray gun and the adherend are at a distance of 50-90 cm, and the angle of the oblique 45-degree angle is better.
The open time is usually within 2-10 minutes. The specific operation time is determined according to the temperature and humidity of the production site.
If the drying time is too long, non-stick phenomenon will occur, and the glue will lose its viscosity, resulting in failure of bonding.
3. If there is any abnormality in the production process, please check the production line item by item immediately, and ask the technical unit to cooperate.
One-component self-crosslinking polyvinyl acetate emulsion adhesive with excellent water resistance, heat resistance, excellent wet viscosity and fast bonding speed when hot-pressed or bonded, can meet the German standard DIN204 D2 waterproof grade
Two-component, long opening time, high bonding strength, curing at room temperature; good weather resistance. Suitable for common rubber wood, northeast birch, poplar and other medium cork and cork
Medium-high hot melt adhesive, suitable for fully automatic coating machine. It has good feeding performance, good thermal stability and strong adhesion after melting. The rubber layer has certain toughness and hardness.
Other related products